Cold welding this podcast together

Circuit Break Podcast #361

Cold Welding This Podcast Together

Related Topics
Kent Johnson: Religious Diversity in Electrical Engineering

Kent Johnson, Senior Corporate Advisor at the Religious Freedom and Business Foundation discusses the role of religious diversity in the workplace.

Entangled Steam

Parker and Stephen dive into the world of batteries, sparked by the BetaVolt BV100's claim of a 50-year lifespan.

Cloud of Disks

Join Parker and Stephen as they delve into Japan's decision to phase out floppy disks and CD-ROMs for government submissions.

Other Resources

Circuit Break Podcast
Blog
eBooks & Guides
Webinars
Videos
Case Studies
Tour MacroFab's ITAR-Compliant Facility

January 14, 2023, Episode #361

Will this podcast hold together? Or will the tig welder that Stephen is modifying tear the podcast apart at the seams? Only 555 timers can save us!

Adding Cold Welding Function to any Welder

  • Cold spot weld function
  • Most tig welders interface with a 5 pin foot controller
    • 3 pins for potentiometer – analog signal telling how much amperage
    • 2 pin switch for initiating the arc
  • Made a circuit to spoof the footswitch
    • 555 timer to set the duty cycle
    • Monostable mode
    • Capacitively coupled to allow for single button presses
  • Range: 1ms to 100ms

About the Hosts

Parker dillmann
  Parker Dillmann

Parker is an Electrical Engineer with backgrounds in Embedded System Design and Digital Signal Processing. He got his start in 2005 by hacking Nintendo consoles into portable gaming units. The following year he designed and produced an Atari 2600 video mod to allow the Atari to display a crisp, RF fuzz free picture on newer TVs. Over a thousand Atari video mods where produced by Parker from 2006 to 2011 and the mod is still made by other enthusiasts in the Atari community.

In 2006, Parker enrolled at The University of Texas at Austin as a Petroleum Engineer. After realizing electronics was his passion he switched majors in 2007 to Electrical and Computer Engineering. Following his previous background in making the Atari 2600 video mod, Parker decided to take more board layout classes and circuit design classes. Other areas of study include robotics, microcontroller theory and design, FPGA development with VHDL and Verilog, and image and signal processing with DSPs. In 2010, Parker won a Ti sponsored Launchpad programming and design contest that was held by the IEEE CS chapter at the University. Parker graduated with a BS in Electrical and Computer Engineering in the Spring of 2012.

In the Summer of 2012, Parker was hired on as an Electrical Engineer at Dynamic Perception to design and prototype new electronic products. Here, Parker learned about full product development cycles and honed his board layout skills. Seeing the difficulties in managing operations and FCC/CE compliance testing, Parker thought there had to be a better way for small electronic companies to get their product out in customer's hands.

Parker also runs the blog, longhornengineer.com, where he posts his personal projects, technical guides, and appnotes about board layout design and components.

Stephen Kraig
  Stephen Kraig

Stephen Kraig is a component engineer working in the aerospace industry. He has applied his electrical engineering knowledge in a variety of contexts previously, including oil and gas, contract manufacturing, audio electronic repair, and synthesizer design. A graduate of Texas A&M, Stephen has lived his adult life in the Houston, TX, and Denver, CO, areas.

Stephen has never said no to a project. From building guitar amps (starting when he was 17) to designing and building his own CNC table to fine-tuning the mineral composition of the water he uses to brew beer, he thrives on testing, experimentation, and problem-solving. Tune into the podcast to learn more about the wacky stuff Stephen gets up to.

Special thanks to whixr over at Tymkrs for the intro and outro!